
Oldsmar, FL
Home Water Filtration in Oldsmar, Starting With What We Find
We install and look after whole-home filtration, water softeners, reverse osmosis and well water treatment for your home. Before we suggest anything, we look at your plumbing, your current equipment and what your water is doing at the tap. We work in Oldsmar and nearby towns like Palm Harbor and Westchase.
- Lifetime whole-home tank warranty
- We inspect before recommending
- Findings in plain words
- Ongoing filter and service support

About Oldsmar Water Filtration
We're a local water treatment company. We put in filters, softeners and reverse osmosis systems, and we keep them running. We'd rather sell you less and have it work than sell you more and have you wonder why.
Our habit is simple. Look first, say what we found, then recommend. Plenty of homes need only one piece of equipment, and some need a repair instead of anything new. You'll hear that from us straight.
- Warranty
- Lifetime warranty on the whole-home treatment tank
Water Treatment for Your Home
We handle whole-home filtration, water softeners, reverse osmosis, well water treatment and chlorine and chloramine removal. We also do softener repair and maintenance, plus water softener and filtration system replacement when an old unit is past saving. Each job starts the same way: we look first, then we tell you what we saw.

Whole-Home Filtration
A filter on your main water line so every faucet, shower and appliance gets cleaner water, sized after we look at your plumbing.

Water Softeners
We look at your scale, plumbing and household water use first, then size and install a softener only if it fits your home.

Reverse Osmosis
An under-sink reverse osmosis system gives you clean drinking and cooking water from its own faucet, sized to your kitchen after we look at the setup.

Well Water Treatment
Treatment for private wells with sulfur smell, orange stains or scale, sized after we look at your pump, tank and plumbing.

System Replacement
We look over your old softener or filter, tell you if it can be saved, and swap it out cleanly when it can't.

Softener Repair & Maintenance
Salt not dropping, spots coming back or a tank full of water? We find the cause on your softener and fix that part, not the whole system.

Chlorine & Chloramine Removal
Carbon systems sized for the disinfectant in your water, so the bleach taste and smell leave the tap and the shower.
What Goes Into the Price
Every house has its pipes run a little differently, which is why we won't put a number on a system before we've seen yours. These are the things that make the biggest difference. During the visit, we show you which of them apply to your home and why.
Give us a call to talk it through, and we'll set a time to see your setup. After the visit, you get a written estimate with each part and the labor broken out line by line.
- Type of system
- Putting an under-sink reverse osmosis unit in is a smaller job than installing a whole-home carbon filter. A softener and a filter together cost more than either one by itself.
- Size of your home and water use
- A bigger household with more bathrooms runs more water through the equipment. Tanks and valves have to be sized for that flow, or the pressure drops when two showers are going.
- Where the system goes
- Many homes here have the main line in the garage or on an outside wall. When there's a drain and an outlet nearby, labor stays low. Tight spaces and long pipe runs mean more time and more fittings.
- City water or a private well
- Well water often needs a few stages of treatment. City water usually needs less, and carbon for chlorine or chloramine is often all it takes.
- Old equipment coming out
- Removing a dead softener or filter and rebuilding the bypass adds some labor. If the pipes around it are corroded, we show you before we cut anything.
- Upkeep over the years
- Filters, membranes and salt keep costing after install day. We tell you what each system needs and roughly how often, so you know what it really costs to own.
How We Work in Your Home
We keep the steps in order. We look first, explain what we saw, and only then talk about equipment. Here's how that plays out on a visit.
A careful look before any pitch
We check where the main line enters, the pipe sizes, the drain and power near the install spot and any system you already own. We also look at what you've been noticing, like spots on glasses, rings in the toilet or an odor at the tap.
Findings you can follow
You hear what we saw in everyday words. When nothing needs fixing, we tell you that plainly. Sometimes a small under-sink unit does the job and a whole-home system would be overkill.
Repair before replace
If the softener or filter you have can be fixed, that's the first thing we bring up. Swapping a stuck valve or a worn seal is a far smaller job than a new tank, and the price reflects that.
We stay around after the install
We offer ongoing customer support for maintenance, filter replacements and service needs. One call gets you help with a filter swap, a salt question or a unit that quit cycling.
A clean job site
We cover the floor in the work area, keep our tools in one place and take the old equipment and packaging with us. Your garage or utility closet is left the way we found it.
How a Job Runs
Most installs follow these steps. A repair usually takes fewer.
- 1
You call us
Describe what you've noticed at the tap and any equipment already in place. We'll get a few details from you and book a visit that fits your week.
- 2
We look over your setup
We check the plumbing, the spot where a system would go, any existing equipment and the signs at your sinks and fixtures. If you have a lab report or the utility's annual water report, we'll go through it together.
- 3
We explain what we found
Findings come first, then the options that make sense, and that can include leaving things as they are. After that, you get a written estimate.
- 4
Install day
We shut off the water, cover the floor and put the system in with a bypass so it's easy to service later. Most installs wrap up in one day. Before we go, we run the system, check every joint for leaks and show you how it works.
- 5
Support afterward
When a filter comes due or something doesn't seem right, call the same number. We handle maintenance and service on the equipment we installed.
Questions We Hear Most
Something not covered here? (813) 358-6770
Do I really need a water softener?
Not always. A softener pays off when hard water leaves scale on fixtures, spots your dishes or builds up inside the water heater. If we don't see those signs, or the hardness is mild, we'll tell you to pass on it. A carbon filter or a reverse osmosis unit is often the smarter buy.
My tap water tastes like a pool. What fixes that?
That taste is the disinfectant the utility adds, either chlorine or chloramine. It's there for a reason, but you don't have to drink it. A whole-home carbon filter removes it at every tap. Chloramine calls for a catalytic carbon made for the job, so we confirm which one your utility uses before we pick the media.
What's the difference between whole-home filtration and reverse osmosis?
A whole-home filter sits where the main line comes in and treats all the water your home uses, including showers and laundry. A reverse osmosis system lives under a single faucet, usually in the kitchen, and pulls out far more from the water you drink and cook with. Plenty of houses run both. We'll steer you toward whichever one fits the problem you're having.
What warranty comes with your systems?
The whole-home treatment tank carries a lifetime warranty. When we go over your estimate, we'll explain what that covers.
Can you fix my old softener instead of replacing it?
Often, yes. The problem is usually a control valve, a worn seal, a clogged injector or something in the brine tank. We check the unit and tell you whether a repair makes sense. If the tank or resin is worn out, we'll say so and explain what a replacement involves.
I'm on a private well. Do you work on those?
We do. Wells can bring problems city water rarely has, like orange stains from iron, grit in the lines or a sulfur smell. We look at the well equipment, the pressure tank and what's showing up inside your home, then explain which treatment fits. If a lab has already checked your water, keep that report out and we'll go over it with you.
How messy is install day?
Not very. We put down floor covers, keep the work in one spot and only shut the water off as long as the job needs. The old equipment and all the packaging go with us.
How do I get a price?
Call and tell us what's happening. We'll set a time to see your setup, then give you a written estimate listing every part and the labor. You can get your quote by phone or in person after the visit, whichever works better for you.
Where We Work
Our service area is Oldsmar plus the towns that ring it. On the Pinellas side, that means Palm Harbor, East Lake, Safety Harbor, Clearwater and Dunedin. Heading toward Tampa, we also cover Westchase, Town 'n' Country, Carrollwood, Citrus Park and Keystone.
- Oldsmar
- Palm Harbor
- East Lake
- Westchase
- Safety Harbor
- Clearwater
- Town 'n' Country
- Dunedin
- Carrollwood
- Citrus Park
- Keystone
If you can't tell whether your street falls inside our area, just call and ask. The Service Areas page has the full list of towns.


Let's Take a Look at Your Water Setup
Tell us what you're seeing at the tap and what equipment you have now. We'll set a time to come out and give you straight findings before any recommendation.